5 Test Methods Hydrostatic Head Tester Equipped with a Clearly LED
Hydrostatic Head Tester, used for determining the resistance of
fabrics (canvas, coated fabrics, cover cloth, rainproof clothing
fabrics, and geotextile materials) and films to water penetration
under pressure while firmly clamped in the test rig of standard
For special medical protective clothing compression-folding
(Schildknecht) flex cracking resistance testing, this hydrostatic
head tester is also capable of doing extra tests when it fails the
flex cracking resistance test, which defined in standards like EN
14126 – 2003, EN14325, EN ISO 7854.
0 ~ 200kPa (20 m water column).
0~ 500kPa (50 m water column).
0 ~ 1000kPa (100 m water column).
Closed-loop controlled servo motor drives pistons to achieve the
unique water pressure raising rate balance system.
The variable test method can be selected, test time and variable
pressure increasing rate can be set and saved.
Wide range of pressure increasing rate and freely adjustable.
Pressure increasing system is adjusted by the dynamic feedback to
Real-time test results are shown on the large colorful touch panel.
Test results can be made up to a report on software and print out
5 test methods are included
Pressure raising mode, Constant-pressure mode, Constant pressure
& fixed time mode, Extending-relaxing mode, Water penetration,
and leakage mode.
Equipped with a LED lamp to observe the test process clearly.
Increasing rate of water pressure: 1 ~ 60kPa/min stepless
Units: Pa, kPa, mmHg, cmH2O
Automatic clamp with holding force: 5kN
Standarad Test Head: 100cm2
Medical Masks and Protective Clothing: EN 14126 – 2003, EN14325, EN
AATCC 127, ISO 811/1420A, EN 20811,GB/T 4744
220 V 50 Hz 200 W
690 x 540 x 870 mm (L x W x H)